Aluminum Machining

Turned and Profiled from Solid Bar Stock

Machining in process

Parts machined off of our CNC Lathes.

Threaded Tubes

Parts machined from tubing, threaded and drilled on each end using a CNC lathe with live tooling for the cross holes.

Threaded and drilled.

Cross holes completed in the same operation as the threading using a CNC with a Live Tooling Option.

Milled Caps

Using our CNC's with live tooling parts were drilled and tapped in the same machine.

Drilled, threaded and milled

Made from solid bar stock parts are drilled, counter bored, threaded and milled in a CNC Lathe with live tooling.

Plating and Anodizing

After parts were machined from aluminum they were anodized and assembled complete and ready for our customers use.

Measuring all parts

Many parts are gaged using micrometers. All measuring is done according to written control plans for each part machined.

Complex Bushings

Machined with ID Grooves, cross hole is tapped. Parts were completed in a CNC lathe with live tooling and heat treated to customers specs prior to shipping.

Fine finish

Parts machined with profile to a fine mirror finish from aluminum

Brass components

A sampling of some of the brass fittings and spacers we have machined in house.

Diversity

We machine a wide variety of parts for many industries. These are just a few.

Copper Assembly

Parts were completed and assembled using our equipment and preferred suppliers to complete brazing and assembly of the finished product.

Bronze Parts

Machining from bronze bar, with steps and cross holes completed in CNC's with live tooling.

Acme Threads and Cross Holes

We can machine a variety of thread types both internal and external all our gaged for accuracy during the production process.

Machined and Plated - product complete

Image is adjusted to protect product identity. We provide many value added options for completed parts.

"Green" bushings, with notches

Parts are ready for heat treat followed by a final grinding process to make hardened and ground bushings for heavy use applications.

Turned Stem

Machined with grooves and profiled features, this is the tip of the part as completed.

Volume Machining

Parts are machined and prepared for final shipping. The inprocess identifcation tag (shown) stays with the parts until they are shipped.

Basic Maching in small sizes

Parts from 1/2" to 12" OD can be machined in our equipment. Lengths can be up to 14"

Finished Bushings

Machined with ID Groove, heat treated and ground to finish. We make bushings.