Threaded Cap

Turning, profile and face holes were machined on a CNC lathe with live tooling.

Threaded Stem

After turning and threading the hex flats were milled in a CNC lathe with live tooling to complete the part.

Assorted Brass Parts

All parts were turned, threaded and completed in house, including the cross hole.

Threaded Stem

Parts were turned, threaded and grooved in the same machine from a solid bar.

Threaded Stems

Parts were drilled through, threaded and then the hex was milled on the end in a CNC lathe with live tooling.

Double Start Acme Threads

In addition to turning, drilling, and threading through the part a cross hole was drilled in the side for lubricating.

Turned from solid stock

These parts also have threads in the ID of the parts below the step.

Hardened & Ground bushings with multiple features

Parts have cross hole drilled & tapped, ID has grooves and steps.

Hardened Bushings OD Ground

These parts are ready for ID grinding to complete all operations.

Turned and Drilled

Parts turned with profile and drilled in CNC lathe

Shoulder Bushings "Green"

After heat treat these will be hard turned and phosphate coated.

Hardened Bushings with Spiral Grooves

Ground on OD and ID after heat treat, ready for shipment.